Tcl_RegExpMatch(3) Tcl Library Procedures Tcl_RegExpMatch(3) 







Tcl_RegExpMatch, Tcl_RegExpCompile, Tcl_RegExpExec,
    Tcl_RegExpRange, Tcl_GetRegExpFromObj, Tcl_RegExpMatchObj,
    Tcl_RegExpExecObj, Tcl_RegExpGetInfo - Pattern matching with regular
    expressions








#include <tcl.h>

int
Tcl_RegExpMatchObj(interp, textObj, patObj)

int
Tcl_RegExpMatch(interp, text, pattern)

Tcl_RegExp
Tcl_RegExpCompile(interp, pattern)

int
Tcl_RegExpExec(interp, regexp, text, start)

void
Tcl_RegExpRange(regexp, index, startPtr, endPtr)

Tcl_RegExp
Tcl_GetRegExpFromObj(interp, patObj, cflags)

int
Tcl_RegExpExecObj(interp, regexp, textObj, offset, nmatches, eflags)

void
Tcl_RegExpGetInfo(regexp, infoPtr)









  
Tcl_Interp *interp (in)

  
Tcl interpreter to use for error reporting. The interpreter may be NULL if
      no error reporting is desired.

  
Tcl_Obj *textObj (in/out)

  
Refers to the object from which to get the text to search. The internal
      representation of the object may be converted to a form that can be
      efficiently searched.

  
Tcl_Obj *patObj (in/out)

  
Refers to the object from which to get a regular expression. The compiled
      regular expression is cached in the object.

  
char *text (in)

  
Text to search for a match with a regular expression.

  
const char *pattern (in)

  
String in the form of a regular expression pattern.

  
Tcl_RegExp regexp (in)

  
Compiled regular expression. Must have been returned previously by
      Tcl_GetRegExpFromObj or Tcl_RegExpCompile.

  
char *start (in)

  
If text is just a portion of some other string, this argument
      identifies the beginning of the larger string. If it is not the same as
      text, then no “^” matches will be
    allowed.

  
int index (in)

  
Specifies which range is desired: 0 means the range of the entire match, 1
      or greater means the range that matched a parenthesized
    sub-expression.

  
const char **startPtr (out)

  
The address of the first character in the range is stored here, or NULL if
      there is no such range.

  
const char **endPtr (out)

  
The address of the character just after the last one in the range is
      stored here, or NULL if there is no such range.

  
int cflags (in)

  
OR-ed combination of the compilation flags TCL_REG_ADVANCED,
      TCL_REG_EXTENDED, TCL_REG_BASIC, TCL_REG_EXPANDED,
      TCL_REG_QUOTE, TCL_REG_NOCASE, TCL_REG_NEWLINE,
      TCL_REG_NLSTOP, TCL_REG_NLANCH, TCL_REG_NOSUB, and
      TCL_REG_CANMATCH. See below for more information.

  
int offset (in)

  
The character offset into the text where matching should begin. The value
      of the offset has no impact on ^ matches. This behavior is
      controlled by eflags.

  
int nmatches (in)

  
The number of matching subexpressions that should be remembered for later
      use. If this value is 0, then no subexpression match information will be
      computed. If the value is -1, then all of the matching subexpressions will
      be remembered. Any other value will be taken as the maximum number of
      subexpressions to remember.

  
int eflags (in)

  
OR-ed combination of the execution flags TCL_REG_NOTBOL and
      TCL_REG_NOTEOL. See below for more information.

  
Tcl_RegExpInfo *infoPtr (out)

  
The address of the location where information about a previous match
      should be stored by Tcl_RegExpGetInfo.
    
    

    

  










Tcl_RegExpMatch determines whether its pattern
    argument matches regexp, where regexp is interpreted as a
    regular expression using the rules in the re_syntax reference page.
    If there is a match then Tcl_RegExpMatch returns 1. If there is no
    match then Tcl_RegExpMatch returns 0. If an error occurs in the
    matching process (e.g. pattern is not a valid regular expression)
    then Tcl_RegExpMatch returns -1 and leaves an error message in the
    interpreter result. Tcl_RegExpMatchObj is similar to
    Tcl_RegExpMatch except it operates on the Tcl objects textObj
    and patObj instead of UTF strings. Tcl_RegExpMatchObj is
    generally more efficient than Tcl_RegExpMatch, so it is the preferred
    interface.


Tcl_RegExpCompile, Tcl_RegExpExec, and
    Tcl_RegExpRange provide lower-level access to the regular expression
    pattern matcher. Tcl_RegExpCompile compiles a regular expression
    string into the internal form used for efficient pattern matching. The
    return value is a token for this compiled form, which can be used in
    subsequent calls to Tcl_RegExpExec or Tcl_RegExpRange. If an
    error occurs while compiling the regular expression then
    Tcl_RegExpCompile returns NULL and leaves an error message in the
    interpreter result. Note: the return value from Tcl_RegExpCompile is
    only valid up to the next call to Tcl_RegExpCompile; it is not safe
    to retain these values for long periods of time.


Tcl_RegExpExec executes the regular expression pattern
    matcher. It returns 1 if text contains a range of characters that
    match regexp, 0 if no match is found, and -1 if an error occurs. In
    the case of an error, Tcl_RegExpExec leaves an error message in the
    interpreter result. When searching a string for multiple matches of a
    pattern, it is important to distinguish between the start of the original
    string and the start of the current search. For example, when searching for
    the second occurrence of a match, the text argument might point to
    the character just after the first match; however, it is important for the
    pattern matcher to know that this is not the start of the entire string, so
    that it does not allow “^” atoms in the pattern to
    match. The start argument provides this information by pointing to
    the start of the overall string containing text. Start will be
    less than or equal to text; if it is less than text then no
    ^ matches will be allowed.


Tcl_RegExpRange may be invoked after Tcl_RegExpExec
    returns; it provides detailed information about what ranges of the string
    matched what parts of the pattern. Tcl_RegExpRange returns a pair of
    pointers in *startPtr and *endPtr that identify a range of
    characters in the source string for the most recent call to
    Tcl_RegExpExec. Index indicates which of several ranges is
    desired: if index is 0, information is returned about the overall
    range of characters that matched the entire pattern; otherwise, information
    is returned about the range of characters that matched the index'th
    parenthesized subexpression within the pattern. If there is no range
    corresponding to index then NULL is stored in *startPtr and
    *endPtr.


Tcl_GetRegExpFromObj, Tcl_RegExpExecObj, and
    Tcl_RegExpGetInfo are object interfaces that provide the most direct
    control of Henry Spencer's regular expression library. For users that need
    to modify compilation and execution options directly, it is recommended that
    you use these interfaces instead of calling the internal regexp functions.
    These interfaces handle the details of UTF to Unicode translations as well
    as providing improved performance through caching in the pattern and string
    objects.


Tcl_GetRegExpFromObj attempts to return a compiled regular
    expression from the patObj. If the object does not already contain a
    compiled regular expression it will attempt to create one from the string in
    the object and assign it to the internal representation of the
    patObj. The return value of this function is of type
    Tcl_RegExp. The return value is a token for this compiled form, which
    can be used in subsequent calls to Tcl_RegExpExecObj or
    Tcl_RegExpGetInfo. If an error occurs while compiling the regular
    expression then Tcl_GetRegExpFromObj returns NULL and leaves an error
    message in the interpreter result. The regular expression token can be used
    as long as the internal representation of patObj refers to the
    compiled form. The cflags argument is a bit-wise OR of zero or more
    of the following flags that control the compilation of patObj:





  

  
Compile advanced regular expressions (“ARE”s). This mode
      corresponds to the normal regular expression syntax accepted by the Tcl
      regexp and regsub commands.

  

  
Compile extended regular expressions (“ERE”s). This mode
      corresponds to the regular expression syntax recognized by Tcl 8.0 and
      earlier versions.

  

  
Compile basic regular expressions (“BRE”s). This mode
      corresponds to the regular expression syntax recognized by common Unix
      utilities like sed and grep. This is the default if no flags
      are specified.

  

  
Compile the regular expression (basic, extended, or advanced) using an
      expanded syntax that allows comments and whitespace. This mode causes
      non-backslashed non-bracket-expression white space and #-to-end-of-line
      comments to be ignored.

  

  
Compile a literal string, with all characters treated as ordinary
      characters.

  

  
Compile for matching that ignores upper/lower case distinctions.

  

  
Compile for newline-sensitive matching. By default, newline is a
      completely ordinary character with no special meaning in either regular
      expressions or strings. With this flag, “[^” bracket
      expressions and “.” never match newline, “^”
      matches an empty string after any newline in addition to its normal
      function, and “$” matches an empty string before any newline
      in addition to its normal function. REG_NEWLINE is the bit-wise OR
      of REG_NLSTOP and REG_NLANCH.

  

  
Compile for partial newline-sensitive matching, with the behavior of
      “[^” bracket expressions and “.” affected, but
      not the behavior of “^” and “$”. In this mode,
      “[^” bracket expressions and “.” never match
      newline.

  

  
Compile for inverse partial newline-sensitive matching, with the behavior
      of “^” and “$” (the “anchors”)
      affected, but not the behavior of “[^” bracket expressions
      and “.”. In this mode “^” matches an empty
      string after any newline in addition to its normal function, and
      “$” matches an empty string before any newline in addition
      to its normal function.

  

  
Compile for matching that reports only success or failure, not what was
      matched. This reduces compile overhead and may improve performance.
      Subsequent calls to Tcl_RegExpGetInfo or Tcl_RegExpRange
      will not report any match information.

  

  
Compile for matching that reports the potential to complete a partial
      match given more text (see below).






Only one of TCL_REG_EXTENDED, TCL_REG_ADVANCED,
    TCL_REG_BASIC, and TCL_REG_QUOTE may be specified.


Tcl_RegExpExecObj executes the regular expression pattern
    matcher. It returns 1 if objPtr contains a range of characters that
    match regexp, 0 if no match is found, and -1 if an error occurs. In
    the case of an error, Tcl_RegExpExecObj leaves an error message in
    the interpreter result. The nmatches value indicates to the matcher
    how many subexpressions are of interest. If nmatches is 0, then no
    subexpression match information is recorded, which may allow the matcher to
    make various optimizations. If the value is -1, then all of the
    subexpressions in the pattern are remembered. If the value is a positive
    integer, then only that number of subexpressions will be remembered.
    Matching begins at the specified Unicode character index given by
    offset. Unlike Tcl_RegExpExec, the behavior of anchors is not
    affected by the offset value. Instead the behavior of the anchors is
    explicitly controlled by the eflags argument, which is a bit-wise OR
    of zero or more of the following flags:





  

  
The starting character will not be treated as the beginning of a line or
      the beginning of the string, so “^” will not match there.
      Note that this flag has no effect on how “\A”
      matches.

  

  
The last character in the string will not be treated as the end of a line
      or the end of the string, so “$” will not match there. Note
      that this flag has no effect on how “\Z”
    matches.






Tcl_RegExpGetInfo retrieves information about the last
    match performed with a given regular expression regexp. The
    infoPtr argument contains a pointer to a structure that is defined as
    follows:






typedef struct Tcl_RegExpInfo {


        int nsubs;


        Tcl_RegExpIndices *matches;


        long extendStart;
} Tcl_RegExpInfo;




The nsubs field contains a count of the number of
    parenthesized subexpressions within the regular expression. If the
    TCL_REG_NOSUB was used, then this value will be zero. The
    matches field points to an array of nsubs values that indicate
    the bounds of each subexpression matched. The first element in the array
    refers to the range matched by the entire regular expression, and subsequent
    elements refer to the parenthesized subexpressions in the order that they
    appear in the pattern. Each element is a structure that is defined as
    follows:






typedef struct Tcl_RegExpIndices {


        long start;


        long end;
} Tcl_RegExpIndices;




The start and end values are Unicode character
    indices relative to the offset location within objPtr where matching
    began. The start index identifies the first character of the matched
    subexpression. The end index identifies the first character after the
    matched subexpression. If the subexpression matched the empty string, then
    start and end will be equal. If the subexpression did not
    participate in the match, then start and end will be set to
    -1.


The extendStart field in Tcl_RegExpInfo is only set
    if the TCL_REG_CANMATCH flag was used. It indicates the first
    character in the string where a match could occur. If a match was found,
    this will be the same as the beginning of the current match. If no match was
    found, then it indicates the earliest point at which a match might occur if
    additional text is appended to the string. If it is no match is possible
    even with further text, this field will be set to -1.








re_syntax(n)








match, pattern, regular expression, string, subexpression,
    Tcl_RegExpIndices, Tcl_RegExpInfo







  

    8.1
    Tcl